Features
- Equipped with 90 degrees moist heat disinfection. All accessories inside the chamber such as CO2 sensor, fan and shelves can be disinfected during the 90 degrees celsius disinfection routine.
- Coved corners and quick clean shelves
- Gas supply line filter
- CO2 sensor "auto start", the TC CO2 sensor baseline is reset to ensure accuracy without manual adjustments. This ensures the system operates with stability and maximum accuracy.
- Advanced heating system; a direct hrat system and Pt1000 temperature sensor ensures a stable temperature control with minimal gradient and prompt temperature recovery with no overheat.
- Heating elements and and fibreglass insulation surrounds all sides of the outer chamber wall to provide uniform heating and fast recovery times after door closings.
- Direct airflow ensures optimum temperature uniformity.
- Efficient humidity system, a water reservoir provides a high relative humidity and also allows rapid humidity recovery times.
- Inner small glass doors allow for selective chamber openings, this helps to minimize the introduction of airborne contaminants to the chamber since the size of the access portal is minimized
Download brochure here - CO2 Incubator Direct Heat 90 240
Specifications
| Model |
HF-90 |
HF-240 |
| Int. Dim. (cm)DxWxH |
530x470x607 |
583x607x670 |
| Ext. Dim. (cm) DxWxH |
762x637x909 |
820x70x944 |
| Shelves Dimension (DxW) mm |
445x423 |
503x554 |
| Temp. Min |
Ambient+5°C |
| Temp. Max |
50°C |
| Capacity (L) |
151 |
240 |
| Temp Accuracy |
+/-0.1 |
| Temp Sensor |
PT1000 |
| 90 degrees celsius disinfection time (hr) |
9 |
| Disinfection duration (hrs) |
approx 25 |
| CO2 Control Range (%) |
0-20 |
| CO2 Deviation(%) |
+/- 0.1 |
| CO2 Sensor |
thermal conductivity |
| Humidity (%) |
>95 |
| Water Reservoir Volume (litres) |
3 |
| Inner small glass doors |
3 |
6 (optional) |
| Power (watts) |
600 |
735 |
| Weight (kg) |
80 |
98 |